SELF LOCKING TRAY ERECTOR
EAGLE'S POPLOK, Self Locking Tray Erector can erect corrugated trays with NO GLUE. We have developed machines to do 1-tuck, 2-tuck and up to 6-tuck in our group of standard machines. We can also supply you a machine to erect complicated display trays required by Club Stores around the country.
POPLOK SEQUENCE
POPLOK SELF LOCKING TRAY ERECTOR
Our standard machine can do a self lock with or without lid, 2-sided tuck.
Standard features on all machine include.
HEAVY DUTY, WELDED STEEL FRAME
QUICK SIZE CHANGE OVER PACKAGE
MECHANICAL LOW MAINTAINCE DRIVE
SEALED BALL BEARING IN BLANK TRANSFER AND SELF      CLEANING TRACKS
INTERLOCKED SAFETY GATES OR DOORS
PIAB COAX VACUUM TECHNOLOGY USED IN TRAY EXTRACTION FROM HOPPER
OMRON PROGRAMMABLE LOGIC CONTROLLER
COLOR TOUCH SCREEN USER INTERFACE
EAGLE SILVER PAINT WITH ALL MOVING PARTS PAINTED YELLOW
120 VOLTS, 1 PHASE, 60 HZ ELECTRICAL SERVICE
24VDC CONTROL VOLTAGE
ALL ELECTRIC CONTROLS
DETAILED OPERATION AND MAINTENANCE MANUAL
MADE IN USA

POPLOK TOP SHEET FEED
POPLOK 2 TUCK NO LID
POPLOK 2 TUCK WITH LID
POPLOK 4 TUCK
POPLOK 5 TUCK
POPLOCK MULTI TUCK
POPLOK OCTIGON
2-TUCK
No Lid.
2-TUCK
With Lid.
4-TUCK
No Lid.
5-TUCK
No Lid.
Multi-TUCK
Display Tray
Believe it or Not
Octigon 4-TUCK
For those LARGE TRAYS we have developed a machine that can handle a self locking blank 60" x 60" flat. The large tray is controlled throughout the folding process to completely eliminate any problems encountered with large blanks.  These machines are equipped with a hydraulic lift table in the high capacity hopper allowing long run times between loading.
For Video Please Click Photo
4760 NW 128th St. Miami, FL 33054
Phone 305-622-4070,  Fax 305-688-7772
info@eaglepm.com
Copyright © 2010 EAGLE Packaging Machinery LLC. All rights reserved

For Video Please Click Photo
5-TUCK SELF LOCKING TRAY ERECTOR
POPLOK 5-Tuck
5- SIDED TUCK TRAY
The 5-Sided Tuck tray is typical of alot of display trays used in discount stores through the country. The machine shown can do 4 different size trays in one machine.  With quick size change over you can adjust between sizes in minutes. This machine can do up to 12 tpm 24/7. With easy load hopper there is no down time in production. With a power requirement of only 120vac, 15amp it will also cut down on utility cost.
POPLOK
For Multi-Tuck machines click photo above
POPLOK 4-Tuck with Rev Flap